Loading...
Loading...
More Energy-Saving, More Faster, More Stable
Request a QuoteMachine Selection Guide
HWAMDA SPV series machines are configured for high-speed thin-wall packaging where filling speed, mold rigidity, cooling, and repeatability directly affect cost per part. The right machine is selected from the product drawing, cavity count, cycle target, material, and automation plan.
Built for high-output packaging cells where every second changes monthly capacity.
Supports thin-wall flow paths that require quick filling before the melt freezes.
Matched with molds, IML robots, chillers, loaders, and stacking systems.
Buying Criteria
Send the product size, wall thickness, material, target output, cavity count, and whether IML is required. HWAMDA uses those details to match clamping force, injection unit, mold opening stroke, robot clearance, and auxiliary cooling.
FAQ
The best machine depends on projected area, shot weight, wall thickness, mold cavity count, and automation. HWAMDA normally starts with the target product and monthly output, then selects the SPV tonnage and injection unit around the mold.
Yes. Thin-wall parts need fast injection response, high rigidity, accurate mold protection, stable cooling, and short dry cycle time. A general-purpose injection molding machine may fill the part poorly or run at an unstable cycle.
Yes, when the machine tonnage, mold opening stroke, robot access, and cycle timing are matched with the IML mold and robot from the beginning.
Parallel movement for shortened cycle time
Servo system minimizes power consumption
Optimized structure for long lifespan
International Model
938/270
Injection Volume
530 / 595 cm³
Injection Weight
482 / 541 g
Injection Speed
368 mm/s
Injection Pressure
177 / 158 MPa
Screw Diameter
50 / 53 mm
Screw L/D Ratio
24.5:1 / 23:1
Clamping Force
2700 kN
Mold Opening Stroke
560 mm
Platen Size
860×850 mm
Tie Bar Distance
580×570 mm
Mold Thickness
220 - 600 mm
Ejector Force
77 kN
Pump Motor Power
37+37 kW
Heater Power
22.5 kW
Machine Dimension
6.2×1.7×2.4 m
Oil Tank
380 L
Typical Applications:
Certified Quality Standards
Our engineering team can help you configure the perfect production line for your specific requirements.